Charger Inverters

The charger inverters are in use for mixed installations where have an external support by auxiliary generator or even electrical grid. Bellow is a typical installation:

 

Every time it is more habitual to do connections to the normal power grid as auxiliary system, saving energy consumption in housing. The mixed installations guarantee the comfort and the safety, while it saves itself in the electrical bill. In addition they allow you not to depend in its entirely on the electrical grid, which sometimes also it generates problems. 

 

 

We will have in an alone framework, a powerful sinusoidal inverter, a sophisticated batteries loader with adaptable technology and a switchboard of high speed CA's transfer of.

Between its many functions, it will allow us to be able to automatic start an electrical generator switching between generator and inverter line underhand form, without generating any micro cut. That is to say, in the case that the batteries are low, it switches automatically to the generator or to the general power grid, without the user notices it. This will guarantee that the devices will not suffer any power outage, therefore, the user will not notice the switch between the inverter and the generator. Also it is possible to replace the figure of the generator by the power grid. 

 

 

As additional device of load, it is possible to use an auxiliary generator or the electrical grid to load the batteries in the case that we do not have sufficient power from the batteries. In this case, the charger inverter very quickly switches and the electronic equipments and computers continue working without interruption.

Also we use the technology developed by Victron Energy, which models offer us between 800VA and 5000VA.

 Looking at the diagram, we see that the solar panels and the wind mill load the batteries across their solar regulators. The auxiliary / power grid of the housing will activate in the case that the batteries are low. The generator will produce more electricity of consumed inside the housing and the surplus the charger inverter takes advantage of it to be loading the batteries.

Therefore, the charge inverter manages the consumption to housing, without the user worries where from the electricity comes, if of the batteries or of the auxiliary / electrical grid.